Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Error "no solution for input parameters"
Posted 2016年10月24日 GMT-4 09:01 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I want to simulate the farfield and the S 11-Parameter of a triangular bowtie antenna. When starting the simulation I get the following error:
- no solution for input parameters
-matrix contains zeros in the diagonal
-the solution does not converge
Can anyone tell me, how I can sove this problem?
Thanks
I want to simulate the farfield and the S 11-Parameter of a triangular bowtie antenna. When starting the simulation I get the following error:
- no solution for input parameters
-matrix contains zeros in the diagonal
-the solution does not converge
Can anyone tell me, how I can sove this problem?
Thanks
1 Reply Last Post 2016年10月27日 GMT-4 08:03
Please login with a confirmed email address before reporting spam
Posted:
7 years ago
Dear Carina,
It’s always difficult to answer such questions without looking at the model. I'd suggest you take a look at the "Dipole Antenna" example from the application library. It should give you a good idea on how to setup an antenna model, also with s-parameter calculation.
Regards,
Andreas
It’s always difficult to answer such questions without looking at the model. I'd suggest you take a look at the "Dipole Antenna" example from the application library. It should give you a good idea on how to setup an antenna model, also with s-parameter calculation.
Regards,
Andreas