Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011年1月17日 GMT-5 15:13
Hello Juergen,
I've successfully installed the update on a 32-windows machine... though I see you have 64. I may need to do so on 64 too. Please update us on this issue
Good luck!
Stephan
Hello Juergen,
I've successfully installed the update on a 32-windows machine... though I see you have 64. I may need to do so on 64 too. Please update us on this issue
Good luck!
Stephan
Ivar KJELBERG
COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011年1月17日 GMT-5 15:43
Hi
I installed the 4.1.0.112 patch on both 32 bit and 64 bits Win-7 without any trouble, several months ago. Has anyting changed with the OS since ? as now everything gets so interconnected ?
--
Good luck
Ivar
Hi
I installed the 4.1.0.112 patch on both 32 bit and 64 bits Win-7 without any trouble, several months ago. Has anyting changed with the OS since ? as now everything gets so interconnected ?
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011年1月18日 GMT-5 07:38
I have emailed the comsol support team. As soon as I get an answer and the patching works, I will post the right steps here.
Thanks all,
Juergen
I have emailed the comsol support team. As soon as I get an answer and the patching works, I will post the right steps here.
Thanks all,
Juergen
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011年1月19日 GMT-5 16:57
I just installed the patch on my Win-7 32 bit machine. However I received the same "unable to create .." error message with my Win XP 64 bit machine.
I just installed the patch on my Win-7 32 bit machine. However I received the same "unable to create .." error message with my Win XP 64 bit machine.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011年1月20日 GMT-5 08:39
Hi all,
the comsol support wrote a very helpful email.
You need to stop all running comsol processes.
Although the Comsol program window was closed, the windows task manager still showed a running "comsol zombie" process.
When I stopped that one, I could install the patch successfully without that strange error message.
Hope that helps,
Juergen
Hi all,
the comsol support wrote a very helpful email.
You need to stop all running comsol processes.
Although the Comsol program window was closed, the windows task manager still showed a running "comsol zombie" process.
When I stopped that one, I could install the patch successfully without that strange error message.
Hope that helps,
Juergen
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011年2月11日 GMT-5 19:46
Jurgen,
Thanks for the tip. I rebooted, then ran the installer again, and everything was able to unzip and install. I didn't have to kill any processes.
- Bob
Jurgen,
Thanks for the tip. I rebooted, then ran the installer again, and everything was able to unzip and install. I didn't have to kill any processes.
- Bob