Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Time dependent solver convergence
Posted 2017年3月12日 GMT-4 06:56 Heat Transfer & Phase Change Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
Failed to find consistent initial values.
Last time step is not converged.
- Feature: Time-Dependent Solver 1 (sol1/t1)
I am getting this above error. How to tackle this
Last time step is not converged.
- Feature: Time-Dependent Solver 1 (sol1/t1)
I am getting this above error. How to tackle this
1 Reply Last Post 2017年3月12日 GMT-4 07:46
Please login with a confirmed email address before reporting spam
Posted:
7 years ago
Hi
As far as I'm concerned, you'd better check the following items:
1, check the material parameters
2, Correct boundary condition, i.e. physically correct boundary condition
3, Initial condition, I think maybe you can solve a stationary study while taking the boundary condition as the initial condition of the time dependent study, and then set the solution of the stationary study as the initial value of the time dependent study.
best wishes
XiaoKang
As far as I'm concerned, you'd better check the following items:
1, check the material parameters
2, Correct boundary condition, i.e. physically correct boundary condition
3, Initial condition, I think maybe you can solve a stationary study while taking the boundary condition as the initial condition of the time dependent study, and then set the solution of the stationary study as the initial value of the time dependent study.
best wishes
XiaoKang