Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Plz help on "Feature: Stationary Solver1(sol1/s1) Error: Failed to create folder to save to"
Posted 2011年3月7日 GMT-5 21:37 Fluid & Heat, Chemical Reaction Engineering, Studies & Solvers Version 4.1 2 Replies
Please login with a confirmed email address before reporting spam
I am very new to COMSOL 4.1
Can anyone tell me why i am having the following error:
Feature: Stationary Solver1(sol1/s1)
Error: Failed to create folder to save to
Regards
Hello Faysal Khan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
I am also getting this error...
The error you mentioned indicates that COMSOL is
unable to create recovery data on disk. Normally COMSOL saves the current
simulation into a recovery directory, which is located in a profile
directory in your home directory. If there is not enough space in your home
directory, or if the path to the home directory contains "non-standard"
characters, this problem may occur. Possible solution is:
Turn off the recovery feature. Start COMSOL 4.1, go to the menu
Options > Preferences > Save
and un-check the "Recovery" check box.
Regards
Faysal