Meshing Problem : Beginner "Acoustic Structure Interaction"

Yasser Nasser Eddine

Please login with a confirmed email address before reporting spam

Hi everybody,

I've just started working on COMSOL MPH on an Acoustic/Structure Interraction. After repairing the geometry, i wanted to mesh it to know if it's well repaired, but i had several errors and warning due to narrow regions and small edges ... , the geometry is quit complicated so i wanted to know if i can have an advise please , just to help me start the work properly

Nb: I'm a beginner on the field

Thank you for your time


2 Replies Last Post 2018年7月13日 GMT-0400上午3:34
Riccardo Roberto De Lucia

Please login with a confirmed email address before reporting spam

Posted: 1 week ago 2018年7月12日 GMT-0400上午11:20

Hi, I am new to acoustics too. As far as I have understood, for FEM analyses, the general good practice is to start from a coarse mesh defined all over the model with maximum element size equal to at least one fifth of the wavelength of the fluid you are simulating in. Then you can refine the mesh for the structure to a finer level. Hope it helps!

Riccardo

Hi, I am new to acoustics too. As far as I have understood, for FEM analyses, the general good practice is to start from a coarse mesh defined all over the model with maximum element size equal to at least one fifth of the wavelength of the fluid you are simulating in. Then you can refine the mesh for the structure to a finer level. Hope it helps! Riccardo

Yasser Nasser Eddine

Please login with a confirmed email address before reporting spam

Posted: 1 week ago 2018年7月13日 GMT-0400上午3:34

Hi Riccardo,

Thank you very much, this was very helpfull for me. I'll continue learning via the application library !

Have a nice weekend

Yasser

Hi Riccardo, Thank you very much, this was very helpfull for me. I'll continue learning via the application library ! Have a nice weekend Yasser

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.