Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The meaning of electric fiel norm: normE_rfwv ?

Posted 2011年9月7日 GMT-4 12:34 RF & Microwave Engineering 7 Replies

Ronald Hadow
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In the Perpendicular Hybrid-Mode Waves module, does normE_rfwv mean sqrt(Ex^2+Ey^2+Ez^2)?

I tried to test it, it seems that normE_rfwv=sqrt(Ex^2+Ey^2).

Thank you very much for clarifying my confusion!
7 Replies Last Post 2011年9月29日 GMT-4 07:59
Ronald Hadow
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月7日 GMT-4 15:27
Here is my own answer from test of a simulation.

normE_rfwv (electric field norm) is not the norm that I was thinking about, i.e. it is NOT sqrt(Ex^2+Ey^2+Ez^2), it is NOT sqrt(Ex^2+Ey^2) either.

It is the AMPLITUDE of the TRANSVERSE electric field, or Maximum(sqrt(Ex^2+Ey^2), it does not change with phase. Ez is out of phase with Ex/Ey, so it is not included

Please let me know if I am wrong.
Here is my own answer from test of a simulation. normE_rfwv (electric field norm) is not the norm that I was thinking about, i.e. it is NOT sqrt(Ex^2+Ey^2+Ez^2), it is NOT sqrt(Ex^2+Ey^2) either. It is the AMPLITUDE of the TRANSVERSE electric field, or Maximum(sqrt(Ex^2+Ey^2), it does not change with phase. Ez is out of phase with Ex/Ey, so it is not included Please let me know if I am wrong.
Luca Mussi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月28日 GMT-4 11:13
Hi Ronald,
I have an identical problem: I'd like to have a plot of the electric far field norm for a piramidal horn, but according to some test I've made (and to your results), it seems to me that quantity "norm_VARIABLENAME" doesn't work exactly for Euclidean norm (that is what I'm looking for).
I have version 3.5.
Hi Ronald, I have an identical problem: I'd like to have a plot of the electric far field norm for a piramidal horn, but according to some test I've made (and to your results), it seems to me that quantity "norm_VARIABLENAME" doesn't work exactly for Euclidean norm (that is what I'm looking for). I have version 3.5.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月28日 GMT-4 14:57
Hi

in both 3.5 and v4 one can access the internal COMSOl variables (most of them) see the equation sub tab in 3.5 and add the "Equation" sub-node via the parametres in V4.

This is the best place to check our understanding of the variables.

In harmonic solver cases most values are amplitudes, RMS from my knowledge not pk-pk

--
Good luck
Ivar
Hi in both 3.5 and v4 one can access the internal COMSOl variables (most of them) see the equation sub tab in 3.5 and add the "Equation" sub-node via the parametres in V4. This is the best place to check our understanding of the variables. In harmonic solver cases most values are amplitudes, RMS from my knowledge not pk-pk -- Good luck Ivar
Luca Mussi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月29日 GMT-4 03:51
Thanks Ivar. I've just searched in "Physics-->Equation System-->Boundary Settings", I've found tangential electric field norm defined as "sqrt(abs(tEx)^2+abs(tEy)^2+abs(tEz)^2)" (so it seems to be an Euclidean norm), but there is no definition for far field variable norm.
My insecurity about the exact expression rised up comparing simple values of single x,y or z component of electric far field vector, with norm value: I mean that if, for a certain point on the boundary where far field variable is defined, x component measures +8 V/m, y component measures +0.05 V/m and z component measures -3 V/m, the norm couldn't be 33 V/m!
Thanks in advance for your attention,

Luca
Thanks Ivar. I've just searched in "Physics-->Equation System-->Boundary Settings", I've found tangential electric field norm defined as "sqrt(abs(tEx)^2+abs(tEy)^2+abs(tEz)^2)" (so it seems to be an Euclidean norm), but there is no definition for far field variable norm. My insecurity about the exact expression rised up comparing simple values of single x,y or z component of electric far field vector, with norm value: I mean that if, for a certain point on the boundary where far field variable is defined, x component measures +8 V/m, y component measures +0.05 V/m and z component measures -3 V/m, the norm couldn't be 33 V/m! Thanks in advance for your attention, Luca
Luca Mussi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月29日 GMT-4 05:12
Sorry, double message.
Sorry, double message.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月29日 GMT-4 07:32
Hi

well its not obvious to give a definitive answer, it also depends how you set your post treatment, many of the plots uses higher order interpolation so this can give collateral effects if i.e. the mesh is not fine enough, you are on an edge of a domain etc

--
Good luck
Ivar
Hi well its not obvious to give a definitive answer, it also depends how you set your post treatment, many of the plots uses higher order interpolation so this can give collateral effects if i.e. the mesh is not fine enough, you are on an edge of a domain etc -- Good luck Ivar
Luca Mussi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年9月29日 GMT-4 07:59
Thank you Ivar.
If it can help you to solve my problem, my model volume consists in two nested spheres with an horn in the centre; I'd like to plot FF on inner sphere edges (in postprocessing mode I use "Domain Plot Parameters-->Line/Extrusion plot"), sphere which meshing tetrahedrons maximum element size is smaller than half-wavelenght.
Thank you Ivar. If it can help you to solve my problem, my model volume consists in two nested spheres with an horn in the centre; I'd like to plot FF on inner sphere edges (in postprocessing mode I use "Domain Plot Parameters-->Line/Extrusion plot"), sphere which meshing tetrahedrons maximum element size is smaller than half-wavelenght.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content