Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Solving for power using surface integral of E^2
Posted 2012年1月8日 GMT-5 13:42 RF & Microwave Engineering, Studies & Solvers Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
Im trying to calculate the power desipated in the silicon layer. So Im using surface integral in derived values, as power is intergral of E^2.
I changed the expression from 'Electric field norm' i.e emw.normE to emw.normE^2, does this approach give the correct values of power ?
And other case is Ive changed the expression to 'Total power dissipation density' that is the module itself, It has the units 'W/m'.
The latter sounded good for me, But want to check in before hand.
Please clarify me.
Im trying to calculate the power desipated in the silicon layer. So Im using surface integral in derived values, as power is intergral of E^2.
I changed the expression from 'Electric field norm' i.e emw.normE to emw.normE^2, does this approach give the correct values of power ?
And other case is Ive changed the expression to 'Total power dissipation density' that is the module itself, It has the units 'W/m'.
The latter sounded good for me, But want to check in before hand.
Please clarify me.
1 Reply Last Post 2012年2月6日 GMT-5 21:49