Implementation of an 2D electro-thermal model for power semiconductor devices simulation: application on gallium nitride
Benbakhti, B., Rousseau, M., De Jeager, J.C.
Generally, the power dissipation in a semiconductor device generates self-heating effect. This effect is very significant in power applications using Gallium Nitride. Taking into account heating effects enables us to understand physical phenomena observed in experiments like the low saturation velocity. In this paper, numerical simulations were carried out to study the influence of thermal ...
Cernat, R.1, Brinkmann, C.1, Weißgerber, T.2
1 Universität Dortmund, Lehrstuhl für Hochspannungstechnik und EMV
2 era GmbH, Dortmund
Hochspannungsimpulstransformatoren werden bei Ottomotoren zur Entzündung des Kraftstoff- Luft-Gemischs eingesetzt. Aktuelle Fahrzeuge sind mit zylinderselektiver Zündung ausgerüstet, so dass für jeden Zylinder ein Zündtransformator benötigt wird. Dieser ist direkt über der Zündkerze positioniert und stellt die benötigte Hochspannung sowie eine ausreichende Funkenenergie zur Verfügung, ...
Oh, S., Sadleir, R.
Department of Biomedical Engineering, University of Florida
Electrical Impedance Tomography (EIT) is a method for forming cross-sectional maps of impedance in an object of interest from external four electrode measurements. EIT reconstruction techniques make assumptions about geometry of the conductor and the electrodes. As a consequence, EIT methods that seek to reconstruct absolute impedance have a high sensitivity to errors in assumed boundary shape, ...
University Paris 13 - Math. dpt.
This note is devoted to a domain decomposition method solving the Helmholtz equation in the frequency domain. We need to perform this global computation as a sequence of local computations, each computation being performed on a single subdomain, without any knowledge of the geometry and meshing of the other subdomains. This is useful when the global geometry is too big to be stored in a single ...
Optimisation of the Electrochemical Instrumentation of a Wear Simulator through Finite Element Modelling
Déforge, D.1, 2, Ponthiaux, P.2, Wenger, F.2, Lina, A.1, Ambard, A.1
1 Electricité de France (EDF) R&D, Chemistry and corrosion group, Les Renardières, Moret sur Loing cedex, France
2 Laboratory LGPM, Ecole Centrale Paris, Chatenay-Malabry cedex, France
Stainless steels are often used in nuclear power plants due to their good corrosion resistance. This good behaviour is due to an oxide film which forms on their surface and insulates them from the corrosive media. Sometimes, flow-induced vibrations can however lead to some contacts between the components, and thus to the degradation of this oxide film. The mechanical removal leads to an increase ...
Butler, P.J.1, Ferko, M.C.2
1 Department of Bioengineering, Penn State University
2 Stryker Orthopedics Corporation
As biologists uncover the structural and functional complexity of living organisms, it is increasingly clear that mathematical models are needed to synthesize experimental data and predict biological responses to external stimuli. Bioengineers are well-suited to develop such models and to add mechanics, fluid flow and other physical cues to the understanding of biological structure and ...
Serincan, M.F, Yesilyurt, S
Mechatronics Program, Sabanci University
¤Understanding of PEMFC’s dynamics and integration with other components ¤Identification of the failure modes ¤Optimal control of the PEMFC ¤Efficiency ¤Lifetime ¤Response time