Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to deal with a model with very thin geometry more easily in COMSOL 4.1
Posted 2011年4月14日 GMT-4 10:55 1 Reply
Please login with a confirmed email address before reporting spam
In COMSOL 3.5 2D modeling, if we want to deal with a model with very thin geometry more easily, we can double-click on the EQUAL buttom at the bottom of the main user interface. Then the structure will be automatically scaled with proper ratio of each direction. However, in COMSOL 4.1, I can not find this function. Is there any one knowing how to turn on this function? Thank you.
Best Regars,
Richard Chen
Best Regars,
Richard Chen
1 Reply Last Post 2011年4月14日 GMT-4 11:14
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
in the Definition View node you have a check box then you need to
1) refresh/update (arrow icon upper border of Definition View GUI
2) to rescale your image, upper icon on graphics window
--
Good luck
Ivar
in the Definition View node you have a check box then you need to
1) refresh/update (arrow icon upper border of Definition View GUI
2) to rescale your image, upper icon on graphics window
--
Good luck
Ivar