Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calculating acoustic reflection and transmission coefficient

Please login with a confirmed email address before reporting spam

Hello,

I am profiling the refractive index of a materials with custom shapes for designing a acoustic metamaterial unit. The reflection coefficient and the transmission coefficient, mathematically can be derived as R = P(reflected)/P(incident) and T = P(transmitted)/P(incident). Which in COMSOL is R = acpr.p_s/acpr.p_b and T = acpr.p_t/acpr.p_b. But, in the application 'Acoustic Reflections off a Water-Sediment Interface' they demonstrate using Pin instead of acpr.p_b. Is there a reason to use Pin instead of acpr.p_b? Because I get non-physical values for using acpr.p_b (i.e. R>2).

Thank you. Akki.


1 Reply Last Post 2021年8月19日 GMT-4 04:29
Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年8月19日 GMT-4 04:29

In 'Acoustic Reflections off a Water-Sediment Interface' is exactly the background pressure. So if you don't get that, it could indicate that you are not using Pin as input in your background field.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
In 'Acoustic Reflections off a Water-Sediment Interface' is exactly the background pressure. So if you don't get that, it could indicate that you are not using Pin as input in your background field.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.