epss_pos 0.6 "Active electrode material volume fraction, positive electrode"
epsbinder_pos 0.1*epss_pos "Binder (including conductive filler) volume fraction, positive electrode"
epsl_pos 1-epss_pos-epsbinder_pos "Electrolyte volume fraction, positive electrode"
L_pos 70[um] "Positive electrode thickness"
rp_pos 6[um] "Positive electrode particle radius"
epss_neg 0.6 "Active electrode material volume fraction, negative electrode"
epsl_neg 1-epss_neg "Electrolyte volume fraction, negative electrode"
L_neg L_pos*cs_max_pos*epss_pos*(1-socminpos)*(1-Li_loss)/((1-Q_excess)*epss_neg*cs_max_neg*(1-socminneg)) "Negative electrode thickness from electrode capacity balance"
rp_neg 6[um] "Negative electrode particle radius"
L_sep 30[um] "Separator thickness"
epsl_sep 0.5 "Electrolyte volume fraction, separator"
L_CC_pos 5[um] "Positive current collector thickness"
L_CC_neg 5[um] "Negative current collector thickness"
Jelly_vol 0.95 "Relative jelly roll volume in battery"
L_batt L_CC_neg+L_CC_pos+L_neg+L_sep+L_neg "Battery cell thickness"
Vol (18[mm]/2)^2*pi*65[mm] "Battery volume"
A_cell Vol*Jelly_vol/L_batt "Battery cell area"
C_rate 1 C-rate
cs_max_pos 50060[mol/m^3] "Maximum positive active electrode material host capacity"
cs_max_neg 31507[mol/m^3] "Maximum negative active electrode material host capacity"
cLicov rhoLi/MLi*L_Limono "Molar amount of lithium in plated monolayer on surface, negative active electrode material"
socminpos 0.222 "Lower lithiation limit, positive active electrode material"
Q_excess 0.25 "Negative electrode excess host capacity"
Li_loss 0.05 "Initial lithium inventory loss during formation cycling"
T 298[K] Temperature
T_ref_neg 298[K] "Reference temperature, negative electrode"
T_ref_pos 298[K] "Reference temperature, positive electrode"
Ea_neg 77.05[kJ/mol] "Kinetics activation energy, negative electrode"
Ea_pos 61[kJ/mol] "Kinetics activation energy, positive electrode"
I_taper 0.5[A] "Tapering current"
Vhigh 4.2[V] "Upper cut-off voltage"
Vlow 2.7[V] "Lower cut-off voltage"
MLi 6.941[g/mol] "Molar mass of lithium"
rhoLi 0.534[g/cm^3] "Density of lithium"
i0_ref_LiMetal 1[A/m^2] "Lithium plating/stripping reference exchange current density"
Ydead 0.1 "Fraction of formed dead lithium during stripping"
socminneg 0.025 "Lower lithiation limit, negative active electrode material"
SOCcell_init 0 "Initial cell SOC"
i0_ref_neg 10[A/m^2] "Reference exchange current density, negative electrode"
i0_ref_pos 10[A/m^2] "Reference exchange current density, positive electrode"
sigmas_neg 1[S/m] "Effective electrode conductivity, negative"
sigmas_pos 1[S/m] "Effective electrode conductivity, positive"
L_Limono 1e-10[m] "Plated lithium monolayer thickness"