Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

support of the old version

Please login with a confirmed email address before reporting spam

I have recently installed the 4.0a version. all my programs are written in the 3.5a version. my question is can 4.0a read/open work with the programs written in the old version?
thank you
Guy

2 Replies Last Post 2010年10月21日 GMT-4 14:59
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年10月18日 GMT-4 02:21
Hi

you can open a 3.5a file in V4 (the best would be to wait for the 4.1 as its translater is better) but you can always open it, however there are several issues to check, read through carefully the release notes (and update to the last v4.0a (993) patch you find on the web site

--
Good luck
Ivar
Hi you can open a 3.5a file in V4 (the best would be to wait for the 4.1 as its translater is better) but you can always open it, however there are several issues to check, read through carefully the release notes (and update to the last v4.0a (993) patch you find on the web site -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年10月21日 GMT-4 14:59
thank you I will try it
Guy
thank you I will try it Guy

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.