Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
is it possible to create a 3D volume data set for export?
Posted 2011年3月15日 GMT-4 10:35 Results & Visualization Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
I have a large domain (45"x3"x16"), and I only want to export data from my domain of interest (2x2x2). is there a way to create a volume data set? or do i need to create a sub-domain when creating the geometry for the model? the entire model geometry is currently one domain. thanks!
1 Reply Last Post 2011年3月15日 GMT-4 11:26
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
right click on the Data Set, or use a Domain selection filter. that should make a data set of reduced size. Bu I do not know how to access it in matlab from there (havent lerned the new V4 features yet ;)
Also you shoudl "box" your 2x2x2 domain with interiour boundaries, it makes life easier to handle the Elements thereafter, also for postprocessing, flux integration ...
--
Good luck
Ivar
right click on the Data Set, or use a Domain selection filter. that should make a data set of reduced size. Bu I do not know how to access it in matlab from there (havent lerned the new V4 features yet ;)
Also you shoudl "box" your 2x2x2 domain with interiour boundaries, it makes life easier to handle the Elements thereafter, also for postprocessing, flux integration ...
--
Good luck
Ivar