Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to select parameters for a flow through a 10 cm pipe with helical continuous blades.

Please login with a confirmed email address before reporting spam

In the liquid which is flowing, nano graphite particles is dispersed. The main objective is to get maximum contact of graphite particles with the helical path (holes are provided in the helical path for increasing surface area of contact). The system will be connected to a small pump for ciirculation. As a beginner, how can I approach to this problem?

Please refer to my design attached.

https://drive.google.com/open?id=1TS4U2YvB3QlQkWp4SsaBOHAHdNpSpftN https://drive.google.com/open?id=1mx8RuB0x_mQXz3eiB45pagvzwXbYNzUt https://drive.google.com/open?id=1my2PUZh_fXd7R2DE48-7GU_pWzAbUWJx



0 Replies Last Post 2017年12月24日 GMT-5 15:00
COMSOL Moderator

Hello VISHNU P

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.