Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

My owen expression

Posted 2012年1月25日 GMT-5 04:19 Plasma Physics, Fluid & Heat, Results & Visualization, Structural Mechanics Version 4.2a 1 Reply

Marian Polak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I would ask if I can add my expressions to the results (calculation of centripetal forces ...)?

Thank you.
1 Reply Last Post 2012年1月25日 GMT-5 11:16
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年1月25日 GMT-5 11:16
Hi

take a look at the Results Derived Variable, here xyou can set in expressions and get the results in tables, and then plot from there, check the doc

--
Good luck
Ivar
Hi take a look at the Results Derived Variable, here xyou can set in expressions and get the results in tables, and then plot from there, check the doc -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content