Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

AC purturbation on top of a DC voltage

Posted 2020年4月21日 GMT-4 18:01 Electromagnetics, Low-Frequency Electromagnetics, MEMS & Nanotechnology, Structural Mechanics Version 5.5 1 Reply

Golam Kibria Chowdhury
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Please see the attached MPH file for drawing.

  1. How to excite a slab with an AC perturbation voltage on top of a DC bias voltage in COMSOL? Let's say I have a slab, I want to apply voltage on both ends as,

  2. How do I properly apply the fixed constraint? If I apply, let's say, a dc voltage to the slab on both sides, it will be squeezed from both ends.

  3. How to incorporate an infinite artificial domain around the slab so that the electric field is zero at infinity?

Attachments:

1 Reply Last Post 2020年4月23日 GMT-4 12:01
Dave Greve Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年4月23日 GMT-4 12:01
Updated: 4 years ago 2020年4月23日 GMT-4 12:02
  1. Frequency Domain Prestressed.
  2. Look into: fixed displacement in SOME axes; Rigid Motion Suppression.
  3. There is no infinity in COMSOL. Look into Infinite Element Domain as an approximation.

D.W. Greve DWGreve Consulting

1. Frequency Domain Prestressed. 2. Look into: fixed displacement in SOME axes; Rigid Motion Suppression. 3. There is no infinity in COMSOL. Look into Infinite Element Domain as an approximation. D.W. Greve DWGreve Consulting

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content