Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Inflation of a cylinder

Please login with a confirmed email address before reporting spam

Hello,

I m trying to simulate a very known benchmark problem, inflation of a thin cylinder due to an internal pressure (the problem is time dependent). In order to so, i used Shell physics and have modeled only a quarter of the cylinder while using the appropriate symmetrical conditions. The cylinder height is 5, thickness is 0.1, Module Young is 1.2*10^6 and Poisson ratio is 0.495 (it is isotropic). Another B.C is that the lower and upper edges cant move in the Z direction.

According to theory, when applying an increasing internal pressure i should receive a convergence in the graph of the internal pressure vs. the ratio between the deformed radius and the original one. unfortunately, i dont get this desired convergence in this graph but just the opposite.

I'd really be pleased to get some help
thx


0 Replies Last Post 2012年4月12日 GMT-4 14:49
COMSOL Moderator

Hello Iftah Nudel

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.