Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to simulate tthis filling process ,help wanted urgently

Posted 2012年4月29日 GMT-4 10:02 Microfluidics Version 4.2 0 Replies

Michal Challi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate the gas(helium) filling a hollow fiber(about 1m long ,diameter is 200um) into a chamber(a cube,volume is 3.16e-4m^3 ).The initial condition is vacuum (about 1e-2pa) in the fiber and the chamber .The inlet is constant pressure(2000pa).Temperature is also constant.No other conditions are provided.I have tride many ways but always failed.Here I want some help uegently .Your comments or advices will be very important to me .Thank you for any help.

Attachments:

0 Replies Last Post 2012年4月29日 GMT-4 10:02
COMSOL Moderator

Hello Michal Challi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content