Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Switching from Dirichlet Boundary Condition to Neumann Boundary condition
Posted 2023年3月24日 GMT-4 19:43 Porous Media Flow, Equation-Based Modeling Version 5.4 1 Reply
Please login with a confirmed email address before reporting spam
Hello everyone,
I am currently using the Coefficient form PDE module in COMSOL Multiphysics to solve for the saturation distribution in soil. I am facing an issue where I need to apply a saturation of 1 for the first 5 seconds and then switch to a zero flux boundary condition at that boundary.
Boundary conditions are as follows: **S = 1 for t<5 dS/dY = 0 for t>5 **
I would greatly appreciate any insights or advice on this issue. Thank you in advance for your help.
Attachments:
Please login with a confirmed email address before reporting spam
This blog post may be helpful:
https://www.comsol.com/blogs/how-to-make-boundary-conditions-conditional-in-your-simulation
-------------------Henrik Sönnerlind
COMSOL