Saving simulated model as mat file in matlab, livelink
Posted 2023年10月6日 GMT-4 17:24 General, LiveLink for MATLAB, Model Manager Version 6.1 3 Replies
Please login with a confirmed email address before reporting spam
Hi, I'm using matlab 2022 and comsol 6.1 ver.
I'm simulating comsol with matlab via livelink for various parameters with for loops. I import a mph file into matlab as 'model=mphopen("filename.mph"). Then I can access the result of simulation by accessing the model structure in matlab.
However, it is not possible to save the model structure as mat.file. so it's not possible to post processing once I closed them. According to the following link ( https://www.comsol.com/forum/thread/13088/saving-comsol-model-from-matlab-livelink?last=2015-07-01T14:43:11Z ), we can save the simulated model as mph.file and we can access it as post processing at any time later. However, saving each model as mph file requires too much memory space.. If I save it as m.file, I should re-run everytime to obtain the result again. Does anyone know how to save the simulated model in matlab as m.file, so I can access them easily at anytime later?
Please login with a confirmed email address before reporting spam
Hi Jehyeok
If you need to perform postprocessing on the entire solution of a Comsol model the only way to do that is to have access to the solved Comsol model. The only way to save such a model is to save it as an MPH-file.
If you have an idea of what data you need for postprocessing I suggest that you extract that data using mphinterp or one of the many other functions for extracting numerical data. Once such data have been extracted you can save the data in MAT-files.
If you to extract plots as plotdata you can do: pd = mphplot(model, ...) which will return the data in the pd-variable. Thd pd-variable can be saved in a MAT-file. You can inspect the data in pd or you can perform a plot later using this command: mphplot(pd)
-------------------Lars Gregersen
Comsol Denmark
Please login with a confirmed email address before reporting spam
Hi Jehyeok
If you need to perform postprocessing on the entire solution of a Comsol model the only way to do that is to have access to the solved Comsol model. The only way to save such a model is to save it as an MPH-file.
If you have an idea of what data you need for postprocessing I suggest that you extract that data using mphinterp or one of the many other functions for extracting numerical data. Once such data have been extracted you can save the data in MAT-files.
If you to extract plots as plotdata you can do: pd = mphplot(model, ...) which will return the data in the pd-variable. Thd pd-variable can be saved in a MAT-file. You can inspect the data in pd or you can perform a plot later using this command: mphplot(pd)
Thank you for your answer, Lars! Do you have any plan to add the function to save the whole simulated model as mat file? If I simulate with for loops, it will save mph files as many as the for loops. Therefore, it would be very helpful if I can save each model as an element of a cell.
For example,
clear
format long
import com.comsol.model.*
import com.comsol.model.util.*
ModelUtil.showProgress(true);
model=mphload('file.mph');
modelArray = cell(N);
for i 1:N
model.param.set('X parameter',i);
model.study('std1').run;
modelArray{i}=model;
end
Then, postprocessing at anytime later with i-th element of modelArray.
Please login with a confirmed email address before reporting spam
Hi Jehyeok
Your code will not work. Not today or in the future.
The reason is that the model variable doesn't contain the model at all. It is simply a variable that points to a model which lives in the COMSOL Multiphysics server.
Extracting results from a Comsol model requires that the model settings, its geometry and mesh as well as the physics and shape functions are processed when you ask Comsol to return some data. There is no way that all this information can be saved into a MAT-file and expect that the MAT-file would be smaller than the corresponding MPH-file.
You can perhaps reduce the size of your MPH-files by using some of the suggestions mentioned on one of these pages:
https://www.comsol.com/support/learning-center/article/How-to-Reduce-the-Size-of-Your-Model-File-59711
https://www.comsol.com/support/learning-center/article/Reducing-the-Amount-of-Solution-Data-Stored-in-a-Model-67151.
For mphsave you can use the optimize argument.
The best option remains to extract any numerical results just after having solved the model.
-------------------Lars Gregersen
Comsol Denmark
Reply
Please read the discussion forum rules before posting.
Discussion Forum Rules and Guidelines
The goal of COMSOL Access is to provide a forum for you to communicate effectively with COMSOL as well as your colleagues within the multiphysics simulation community. This involves providing you with access to technical support and downloads of the latest {:comsol} software releases, as well as the ability to share your comments and work with other users of the {:comsol} software through forums such as the blog, discussion forum, and Application Exchange. In order to make this an efficient and pleasant experience for you and other members of COMSOL Access, we ask that you follow a few rules and guidelines.
When registering for COMSOL Access, you agree to provide your complete and truthful information for all fields requested on your COMSOL Access account registration page. You also agree to maintain the accuracy of all information associated with you on your COMSOL Access account. You agree to maintain your COMSOL Access account for use solely by you, not to share your username and password with anyone else, and to take appropriate precautions to restrict access to your username and password from others. Furthermore, you agree not to submit any information relating to your employer through your COMSOL Access account without your employer’s authorization. Should you use a COMSOL Access account associated with an employer, you agree to immediately discontinue using that account upon termination of that employment.
The moderators of the forums will remove any generally objectionable material as quickly as possible. You acknowledge that all posts made to these forums express the views and opinions of the author and not the administrators, moderators, or webmaster (except for posts by these people). Hence, they will not be held liable.
You agree not to post or link to any material that is abusive, obscene, vulgar, slanderous, hateful, threatening, sexually oriented, or that infringes upon or violates any third-party rights or any other material that may violate any applicable laws. You agree that you will not otherwise use your COMSOL Access account to violate or to assist anyone in violating any law. Engaging in any activity in violation of these COMSOL Access rules and guidelines may lead to you being immediately and permanently banned from COMSOL Access. The IP address of all posts is recorded to aid in enforcing these conditions. You agree that the webmaster, administrator, and moderators of the forums have the right to remove, move, or close any topic at any time as they see fit. As a user of COMSOL Access, you agree to any information you have entered into any of the forums being stored in a database.
You agree that you will not use your COMSOL Access account in violation of any applicable export control laws. You represent and warrant that you are not subject to any comprehensive sanction or embargo by the U.S. or any other country, nor are you identified on any list maintained by the U.S. government that identifies persons for which the U.S. maintains restrictions. Further, you represent and warrant that you are not subject to any restriction on the receipt of technology or products under the export control laws of the U.S. or any other country.
Basic Rules
- Flaming: Do not post any messages that harass, insult, belittle, threaten, or flame another member or guest. Debates are fine, but argue with the point, not the person.
- Trolling: Do not post with the purpose of starting a dispute. Note that a person disagreeing with your opinion is not considered trolling; keep it civil, even if you are sure that the other person is wrong. Anything seen as trolling will result in you being banned.
- Spamming: Posts without content or containing nonsense waste space and everyone's time. Spam will be removed from the forum.
- Offensive Posts, Links or Images: Do not use profanity, racial, ethnic, religious, or other slurs or any other offensive material.
- Advertising: Posting of advertisements for products or services, links to auctions, affiliate links, links to promote websites, and so forth is not allowed.
- Disclosure of Personal Information: Do not disclose any other member's email, real name, address, phone number, IP address, or other personal information. This includes posting contents of emails and private messages without the sender's consent. Do not bring personal disputes into the forums. Bans and warnings issued to other users are considered personal information.
- Misleading Titles: The subject line of the post should be as informative as possible about the content of the post. This also reduces the amount of duplicate posts.
- Thread Hijacking: Taking a thread off-topic to pursue one's own agenda is not permitted.
- Piracy: Do not upload, post, email, transmit, or otherwise make available any content that infringes upon any patent, trademark, trade secret, copyright, or other proprietary rights ("Rights") of any party. This includes COMSOL model files created by a forged or illegitimate license.
- Honesty: Users must provide truthful information in creating their COMSOL Access account.
These rules are subject to change. The moderators reserve the right to remove, edit, or move posts at their discretion. The COMSOL Access administrators will reserve the right to permanently remove a user account without notice if any of the rules are not followed. Particular services accessible with your COMSOL Access account may be subject to additional rules. You agree to comply with all rules applicable to each service you access through your COMSOL Access account.
Posting Guidelines
When posting, understand that you are trying to communicate with other people. Although many COMSOL Access members are not fluent in English, the official language of this forum is English.
Here are some important guidelines of language:
- Write in English.
- If you are familiar with LaTeX, please use this to write mathematical equations.
- Always do a quick check for spelling/grammar mistakes.
- Format your post in a legible manner. Use the Preview button often.
- Be concise and articulate as much as possible.
- Use the Enter key to create paragraphs.
- Capitalize correctly. It is difficult to read posts that are written entirely in uppercase or lowercase.
- Use correct punctuation. Avoid run-on sentences.
- Try to avoid using “text speak”, “net speak”, or slang. The purpose of language is to be understood.
- Never invent acronyms and use as few acronyms as possible. For example, write "COMSOL Multiphysics" and not "CMP".
- Review your post before publishing it. Try to catch typos.
- Please check to see if a topic has already been posted. Do not post multiple threads on the same topic.
Disclaimer
By submitting content to the forums, you hereby grant COMSOL a nonexclusive, royalty-free, perpetual, worldwide, and unrestricted license to reproduce, publicly display, publicly distribute, and prepare derivative works of the content. COMSOL hereby grants you a license to copy and/or use content from the forums solely for your own internal purposes. COMSOL provides the forum service for the benefit of our users to share content with the community. All content is provided "as is" without warranty of any kind, express or implied, including without limitation, warranties of merchantability, noninfringement, design, operation, and fitness for a particular purpose, and the entire risk as to the quality and performance of the programs is with you.
Neither COMSOL, the authors, nor the copyright owners of submitted materials warrant that the programs will be error-free, uninterrupted, virus-free, secure, and suitable for your needs, produce specific results, or that errors or failures will be corrected. Comments on supplied content should be sent to the author or copyright owner through the tools provided in the forums.
Please log in to post a reply.
Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.
Suggested Content
- FORUM Modal frequency analysis - Error in saving file
- KNOWLEDGE BASE Error: Failure Loading MATLAB Libraries. This model requires that MATLAB is available.
- BLOG Solutions as Starting Point Values with LiveLink™ for MATLAB®
- KNOWLEDGE BASE COMSOL 6.1 macOS Apple Silicon Native Support
- FORUM Exporting 3D plot data to .mat or .csv file