Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
connecting solid and beam elements.
Posted 2013年3月12日 GMT-4 05:30 Structural Mechanics Version 4.3 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
how can I use the beam element to act as a shear connector between two solid elements.
how can I use the beam element to act as a shear connector between two solid elements.
2 Replies Last Post 2013年4月2日 GMT-4 05:29
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it's quite some knitting of the Dependent variables, as beam come in as lines onto the model and you need to apply the beam end node values to the full connecting boundary, also to link the angles from the beams, you can use rthe rigid connectors (this "makes the link 100% rigid though) or you can use weak constraints
--
Good luck
Ivar
it's quite some knitting of the Dependent variables, as beam come in as lines onto the model and you need to apply the beam end node values to the full connecting boundary, also to link the angles from the beams, you can use rthe rigid connectors (this "makes the link 100% rigid though) or you can use weak constraints
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thank you for your help