Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plastic strain

Posted 2013年8月25日 GMT-4 10:12 Materials, Parameters, Variables, & Functions, Structural Mechanics Version 4.3b 2 Replies

Maciej Ochmanski
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!

I'm playing with plastic strain dependent on the stress level. I have problem, when stress level goes down at the same time plastic strain is going down.
So i have question for you. How to define plastic strain which will remain constant during unloading?

p.s. im using stationary solver

Thank you in advance!
2 Replies Last Post 2013年9月4日 GMT-4 10:06
Fabio Greco
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年8月25日 GMT-4 16:58
Hi,

you can use "Perfectly plastic" in "Hardening model" in the Plasticity Model, so that you will not get hardening, and so without increase/decrease of yield stress. Did you mean this behaviour?

Bests
Hi, you can use "Perfectly plastic" in "Hardening model" in the Plasticity Model, so that you will not get hardening, and so without increase/decrease of yield stress. Did you mean this behaviour? Bests
Maciej Ochmanski
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年9月4日 GMT-4 10:06
Exactly! thank you very much!
Exactly! thank you very much!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content