Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Improve meshing

Please login with a confirmed email address before reporting spam

Hello,
I have a geometry with 100 micron water block which has conical electrodes at the bottom. I am not able to do proper meshing for this. I need extremely fine meshing for the cones, but when I do that, the error displayed is out of memory for meshing. My computer has a 16GB RAM, I am not understanding why it goes out of memory.
Also can I use sweep to mesh the box and then mesh cones using tetrahedral meshing?I use AC/DC module. Please guide me.

0 Replies Last Post 2014年7月23日 GMT-4 16:13
COMSOL Moderator

Hello Rucha Natu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.