Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to add two materials in one Geometry

Posted 2015年1月22日 GMT-5 08:07 RF & Microwave Engineering, Heat Transfer & Phase Change, Battery Design, Chemical Reaction Engineering, Geometry, Materials, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization 1 Reply

Danish Mehmood
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

With Respect;

I am working on a project, and want to add two to three materials, in one geometry.... Can toy tell me, how to do so?

Thanks.

--
Danish
1 Reply Last Post 2015年1月22日 GMT-5 08:12
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2015年1月22日 GMT-5 08:12
See, for instance, the busbar model in the Introduction to COMSOL Multiphysics manual: cdn.comsol.com/documentation/5.0.1.276/IntroductionToCOMSOLMultiphysics.pdf
Best,
Jeff
See, for instance, the busbar model in the Introduction to COMSOL Multiphysics manual: http://cdn.comsol.com/documentation/5.0.1.276/IntroductionToCOMSOLMultiphysics.pdf Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content