Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Model Inputs problem (Material dispersion)
Posted 2015年4月30日 GMT-4 09:36 RF & Microwave Engineering, Materials 3 Replies
Please login with a confirmed email address before reporting spam
Hi, everyone!
I am trying to simulate material dispersion ( gold J&C) in Frequency Domain (eigenfrequency study ) using Model Input ( Frequency) of the material.
But results seems to be wrong (
I suspect that 'freq' is not actual variable for frequency that Solver using during computations( looking for right (eigen) frequency). Does anyone know the right variable for frequency?
Any help will be greatly appreciated!
P.S: I know about another option to include Drude-Lorentz dispertion model in Wave Equation setting, but this doesn't work for me either ( wrong results).
I am trying to simulate material dispersion ( gold J&C) in Frequency Domain (eigenfrequency study ) using Model Input ( Frequency) of the material.
But results seems to be wrong (
I suspect that 'freq' is not actual variable for frequency that Solver using during computations( looking for right (eigen) frequency). Does anyone know the right variable for frequency?
Any help will be greatly appreciated!
P.S: I know about another option to include Drude-Lorentz dispertion model in Wave Equation setting, but this doesn't work for me either ( wrong results).
3 Replies Last Post 2015年5月2日 GMT-4 04:31
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Nina,
May be you can play with eigenvalue linearization for Eigenvalue Solver to account for frequency-dependent material properties.
Regards,
Sergei
May be you can play with eigenvalue linearization for Eigenvalue Solver to account for frequency-dependent material properties.
Regards,
Sergei
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Thanks a lot Sergei ! Now I got expected results )
It works perfectly for version 4 and latter.
For version 3.5 it works a little bit diffrent , when entering 'Transform point' not frequency but eigenvalue should be entered (see attachment).
If somebody else experience the same difficulties i found this www.comsol.com/model/lossy-circular-waveguide-1418 to be very useful.
It works perfectly for version 4 and latter.
For version 3.5 it works a little bit diffrent , when entering 'Transform point' not frequency but eigenvalue should be entered (see attachment).
If somebody else experience the same difficulties i found this www.comsol.com/model/lossy-circular-waveguide-1418 to be very useful.
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi
why haven't COMSOL added some units to help [Hz] versus [rad/s] ?
there are also a few units issues in the first 5.1 in i.e. phase variables showing up in [deg] but noted in [rad]
--
Good luck
Ivar
why haven't COMSOL added some units to help [Hz] versus [rad/s] ?
there are also a few units issues in the first 5.1 in i.e. phase variables showing up in [deg] but noted in [rad]
--
Good luck
Ivar