Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
No Terminal BC in 5.2?
Posted 2016年1月19日 GMT-5 08:13 Low-Frequency Electromagnetics, Structural Mechanics Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I recently switched to COMSOL 5.2, and am building a pretty simple piezoelectric model with the Piezoelectric Devices module (Solid Mechanics + Electrostatics). In the past, I've used a Terminal BC to apply voltage, so that impedance and other lumped parameters are calculated in the result. But I don't see the Terminal BC option in Electrostatics anymore - just Electric Potential. Am I missing something?
Thanks!
Jillian
I recently switched to COMSOL 5.2, and am building a pretty simple piezoelectric model with the Piezoelectric Devices module (Solid Mechanics + Electrostatics). In the past, I've used a Terminal BC to apply voltage, so that impedance and other lumped parameters are calculated in the result. But I don't see the Terminal BC option in Electrostatics anymore - just Electric Potential. Am I missing something?
Thanks!
Jillian
1 Reply Last Post 2016年1月19日 GMT-5 09:16
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Just an educated guess: Could it be that your license for version 5.2 does not include the same set of modules as you had before? Some boundary conditions are only available through certain modules.
Jeff
Jeff