Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

convection-diffusion with chemical reactions

Posted 2010年10月19日 GMT-4 12:27 2 Replies

Daniil Marinov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear Friends,

i am working on a model of plasma jet with several reactive species. Hydrodinamic part is compressible Navier-Stokes, and then i aply convection - diffusion model.
The problem is that reaction equations are coupled and the solver is not able to converge.

Even when i solve 1 chemical equation but it contains square of concentrations - model fails.


Could you please advise me the right way of solving this problem?


Thank you in advance!
Daniil
2 Replies Last Post 2010年10月19日 GMT-4 17:37
Daniil Marinov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年10月19日 GMT-4 12:29
And one more question for specialists:

does anybody know how to state boundary condition for convection/reaction/diffusion with partial reflection of impinging species (in order to take into account surface reactions).

thank you in advance
And one more question for specialists: does anybody know how to state boundary condition for convection/reaction/diffusion with partial reflection of impinging species (in order to take into account surface reactions). thank you in advance
Danial Tz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年10月19日 GMT-4 17:37

Dear Friends,

i am working on a model of plasma jet with several reactive species. Hydrodinamic part is compressible Navier-Stokes, and then i aply convection - diffusion model.
The problem is that reaction equations are coupled and the solver is not able to converge.

Even when i solve 1 chemical equation but it contains square of concentrations - model fails.


Could you please advise me the right way of solving this problem?


Thank you in advance!
Daniil


It can be many reasons, but generally speaking you may have very sharp gradients around your reaction zone, so probably will need much finer mesh, or addition of high artificial diffusion. Also, try separating your solvers into segregated solvers (since fluid does not depend on C, in simple case). Also, make sure you have enough tolerance set for concentrations.


--
Comsol 4.0a
Ubuntu 10.04.1
[QUOTE] Dear Friends, i am working on a model of plasma jet with several reactive species. Hydrodinamic part is compressible Navier-Stokes, and then i aply convection - diffusion model. The problem is that reaction equations are coupled and the solver is not able to converge. Even when i solve 1 chemical equation but it contains square of concentrations - model fails. Could you please advise me the right way of solving this problem? Thank you in advance! Daniil [/QUOTE] It can be many reasons, but generally speaking you may have very sharp gradients around your reaction zone, so probably will need much finer mesh, or addition of high artificial diffusion. Also, try separating your solvers into segregated solvers (since fluid does not depend on C, in simple case). Also, make sure you have enough tolerance set for concentrations. -- Comsol 4.0a Ubuntu 10.04.1

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content