Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
[Comsol 4.4] Using deformation from eigenfrequency 'solid mechanics' simulation as input for electromagnetic simulation
Posted 2016年4月6日 GMT-4 16:24 Low-Frequency Electromagnetics, MEMS & Nanotechnology, RF & Microwave Engineering, MEMS & Piezoelectric Devices, Geometry, Mesh, Structural Mechanics Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
the title describes quite well my problem.
I have a geometry, for which I calculate the mechanical eigenstates through the "solid mechanics" module.
After this step, I end up with a list of mechanical eigenfrequencies and related displacement fields.
Now, I would like to use this displacement field (normalized by a certain constant) as a geometry for an electromagnetic eigenfrequency calculation.
I tried to right-click on the solution dataset and select "Remesh deformed configuration" , but the new mesh created corresponds to the old geometry and not the new one.
Anybody knows how to solve this problem?
Hello Michele Cotrufo
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.