Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
what is the different of 'form an union' and 'form an assembly'?
Posted 2010年11月6日 GMT-4 21:44 2 Replies
Please login with a confirmed email address before reporting spam
Hi
in the Geometry setup, The Finalize node ends each geometry sequence. In the Model Tree, its label is Form
Union or Form Assembly depending on its settings. but is there anyone knows what is the different?
in the Geometry setup, The Finalize node ends each geometry sequence. In the Model Tree, its label is Form
Union or Form Assembly depending on its settings. but is there anyone knows what is the different?
2 Replies Last Post 2015年11月23日 GMT-5 08:47
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the default union mode groups and slit all geoemtric objects such that all interiour boundaries are unique and by default set up a continuous BC on these interiour boundaries.
The assembly mode (nothing to do with CAD assembly, what in COMSOL is called a composite object) groups the composites objects, or separate objects such that they remain with their respective boundaries, this means that you can end up with overlapping entities or dedoubled overlapping bouundaries.
Assembly mode is used particularly for contact physics, and if you want to add physics on the boundaries (that oerlap)
--
Good luck
Ivar
the default union mode groups and slit all geoemtric objects such that all interiour boundaries are unique and by default set up a continuous BC on these interiour boundaries.
The assembly mode (nothing to do with CAD assembly, what in COMSOL is called a composite object) groups the composites objects, or separate objects such that they remain with their respective boundaries, this means that you can end up with overlapping entities or dedoubled overlapping bouundaries.
Assembly mode is used particularly for contact physics, and if you want to add physics on the boundaries (that oerlap)
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hello,
Regarding Form Union & Form Assembly, you will find this knowledgebase helpful:
www.comsol.com/support/knowledgebase/1216/
Regarding Form Union & Form Assembly, you will find this knowledgebase helpful:
www.comsol.com/support/knowledgebase/1216/