Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
detect flaw with eddy current
Posted 2010年11月17日 GMT-5 03:07 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am making a simulation for detecting the full circumferential flaw in one tube. My modeling was built under the magnetic and electric fields. I use two coils. One is the exciter and another is the detector. I use the external current density in the area of exciter. I typed the value of current density(1e6A/m^2) in the blank. But why the current density(mef.Jephi) is changed into twice(2e6A/m^2) as shown in the equation view of the external current density? It is strange.
Attached is my model.
Looking forward to the answer. Thank you!
I am making a simulation for detecting the full circumferential flaw in one tube. My modeling was built under the magnetic and electric fields. I use two coils. One is the exciter and another is the detector. I use the external current density in the area of exciter. I typed the value of current density(1e6A/m^2) in the blank. But why the current density(mef.Jephi) is changed into twice(2e6A/m^2) as shown in the equation view of the external current density? It is strange.
Attached is my model.
Looking forward to the answer. Thank you!
Attachments:
1 Reply Last Post 2010年11月18日 GMT-5 01:30
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
check you version, and take a look at the equations, I suspect a typo inside COMSOL by a factor 2 in MEF for external currents, should be fixed by 4.1 I hope ;)
Workaround: divide your current by 2 in MEF external current load cases, for the time being
--
Good luck
Ivar
check you version, and take a look at the equations, I suspect a typo inside COMSOL by a factor 2 in MEF for external currents, should be fixed by 4.1 I hope ;)
Workaround: divide your current by 2 in MEF external current load cases, for the time being
--
Good luck
Ivar