Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Converting 2D model 3D.

Posted 2016年7月13日 GMT-4 22:36 Simulation Apps, Geometry, Studies & Solvers, Structural Mechanics Version 5.2, Version 5.2a 1 Reply

Suraj Bhosale
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

Can you suggest a way to import a 2-D surface in 3-D file and give it some thickness to make it 3D?
I 've tried directly importing the file but it's filling all the voids in the 2D surface.

Thanking in advance.
Suraj
1 Reply Last Post 2016年7月14日 GMT-4 15:46
Sohan Birla
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年7月14日 GMT-4 15:46
In 3 D component create a work plane, and then import 2-d geometry either drawn in COMSOL or software format .dxf, .dwg. You can extrude it to create required thickness.

Hope this help..
In 3 D component create a work plane, and then import 2-d geometry either drawn in COMSOL or software format .dxf, .dwg. You can extrude it to create required thickness. Hope this help..

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content