Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Out of Memory in Solver Version 3.5a
Posted 2010年12月11日 GMT-5 01:45 Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I have a quick general question.
When you try to solve three applications at once (say, electrostatics, moving mesh and solid,stress/strain) and the solver immediately says Out of Memory, is that because a previous solution could somehow be taking up memory in the file or is it simply due to the fact that the model is too large or cumbersome to solve?
Are there any general tips on limiting memory usage? I would assume to limit the number of mesh elements, and maybe use Direct Spooles solvers. What other methods may be helpful?
Best,
Kevin
I have a quick general question.
When you try to solve three applications at once (say, electrostatics, moving mesh and solid,stress/strain) and the solver immediately says Out of Memory, is that because a previous solution could somehow be taking up memory in the file or is it simply due to the fact that the model is too large or cumbersome to solve?
Are there any general tips on limiting memory usage? I would assume to limit the number of mesh elements, and maybe use Direct Spooles solvers. What other methods may be helpful?
Best,
Kevin
1 Reply Last Post 2010年12月14日 GMT-5 13:08
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Try searching in the
1.) Documentation, which has almost a whole chapter on this topic (Start > Programs > COMSOL 3.5a > Documentation > COMSOL Multiphysics > Modeling Guide, if you're using Windows)
2.) Knowledge Base (click support on the COMSOL website)
3.) Previous posts on this forum
To get you started, check out www.comsol.com/support/knowledgebase/1030/
1.) Documentation, which has almost a whole chapter on this topic (Start > Programs > COMSOL 3.5a > Documentation > COMSOL Multiphysics > Modeling Guide, if you're using Windows)
2.) Knowledge Base (click support on the COMSOL website)
3.) Previous posts on this forum
To get you started, check out www.comsol.com/support/knowledgebase/1030/