Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
RF Transient Far Field
Posted 2016年8月4日 GMT-4 17:30 RF & Microwave Engineering Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi All,
I'm wondering if anyone knows if it is possible to calculate the the far field radiation pattern when modeling in the time domain.
Currently I'm modeling some pulsed terahertz photoconductive antennas, that is... dipole antennas on a semiconductor substrate, excited by defining a time-varying surface current in the dipole gap. There are multiple layers in the substrate, and I would like to see how these layers affect the far field shape of the emitted pulse.
From what I see, to do a far field setup you need to have PML boundaries defined. However, It looks like PMLs are not available in the transient solver.
If anyone has advice, it will be greatly appreciated.
-Nathan
I'm wondering if anyone knows if it is possible to calculate the the far field radiation pattern when modeling in the time domain.
Currently I'm modeling some pulsed terahertz photoconductive antennas, that is... dipole antennas on a semiconductor substrate, excited by defining a time-varying surface current in the dipole gap. There are multiple layers in the substrate, and I would like to see how these layers affect the far field shape of the emitted pulse.
From what I see, to do a far field setup you need to have PML boundaries defined. However, It looks like PMLs are not available in the transient solver.
If anyone has advice, it will be greatly appreciated.
-Nathan
1 Reply Last Post 2016年8月6日 GMT-4 07:55
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hi Nathan,
I am not sure if this works but if you analyse your antenna with some bandwidth and calculate the 2D inverse Fourier you should get the time signal at fare filed.
If you need only the signal at the max directivity of the antenna extract from this point the complex value over the necessary bandwidth. With IFFT you get the time signal.
Regards,
Stefan
I am not sure if this works but if you analyse your antenna with some bandwidth and calculate the 2D inverse Fourier you should get the time signal at fare filed.
If you need only the signal at the max directivity of the antenna extract from this point the complex value over the necessary bandwidth. With IFFT you get the time signal.
Regards,
Stefan