Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to conver 3D model into 2D model

Posted 2016年9月5日 GMT-4 04:14 Version 4.4 2 Replies

Deepshikha Bhargava
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
I am new to COMSOL, i have a 3D model i want to convert it in 2D model. Is it possible? if yes then how?

Thanks.
2 Replies Last Post 2016年9月7日 GMT-4 03:41
Sohan Birla
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年9月6日 GMT-4 12:45
You can add a 2-D axis sym component node and add physics as done in 3D model. You can reduce the model to 2-D axis symmetry only when you axis symmetry.
You can add a 2-D axis sym component node and add physics as done in 3D model. You can reduce the model to 2-D axis symmetry only when you axis symmetry.
Deepshikha Bhargava
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年9月7日 GMT-4 03:41
Thank you for your time. I change the model in 2D.
Thank you for your time. I change the model in 2D.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content