Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

triaxial test external stress and boundary load

Posted 2016年9月14日 GMT-4 20:15 Computational Fluid Dynamics (CFD) Version 5.2a 0 Replies

Haoyu Shi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to make a triaxial test for cylinder sandstone sample, The confining pressure is about 150MPa. In the solid mechanics mode, should I use external stress or boundary load for 150MPa? When I use boundary load, the mode is not symetrical in terms of strain or displacement of top and bottom. When I use the external stress, it can only works with lower confining stress,less than 10MPa.

So what is the different between external stress and boundary load?
triaxial test example, but it use triaxial stress:
www.comsol.com/model/triaxial-test-9702
www.comsol.com/model/triaxial-test-9702
0 Replies Last Post 2016年9月14日 GMT-4 20:15
COMSOL Moderator

Hello Haoyu Shi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content