Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
COMSOL 4.1 Solving Intermediate Points not Included in Parametric Study
Posted 2016年9月15日 GMT-4 13:41 Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
I am trying to perform a parametric study on the effect of thermal conductivity on various parameters. I input discrete values of 1, 2, 5, 10.
I watch as COMSOL solves and it runs intermediate cases-- such as k=4-- which i did not specify.
How do i turn this off? I want it to run ONLY the cases i specify.
Thanks,
I watch as COMSOL solves and it runs intermediate cases-- such as k=4-- which i did not specify.
How do i turn this off? I want it to run ONLY the cases i specify.
Thanks,
1 Reply Last Post 2016年9月15日 GMT-4 13:55
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
To be more detailed:
I am actually trying to run only these cases: k=1,2,5,10,20,60,110,180
After letting the parametric sweep do what it wants, i get back all these values:
1 2 4 5 10 20 52 60 110 135 147.5 153.75 156.875 158.4375 161.5625 163.125 166.25 167.8125 168.7075 170.4975 171.3925 173.1825 174.0775 174.9725 176.7625 177.6575 178.5525 179.4475 180
Anyone have any ideas?
I am actually trying to run only these cases: k=1,2,5,10,20,60,110,180
After letting the parametric sweep do what it wants, i get back all these values:
1 2 4 5 10 20 52 60 110 135 147.5 153.75 156.875 158.4375 161.5625 163.125 166.25 167.8125 168.7075 170.4975 171.3925 173.1825 174.0775 174.9725 176.7625 177.6575 178.5525 179.4475 180
Anyone have any ideas?