Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Interpolation of the data in each element
Posted 2011年1月13日 GMT-5 03:52 Results & Visualization Version 3.5a, Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
I have just a question about Comsol :
So far, I used the software CATIA to solve my PDE.
The different steps are very easy :
- first : the PDE is multiplied by a test function w. A weak form Is obtained
by using Green's theorem,
- the geometry is discretized then in each element of the mesh, the unknown u and w
are developped in a polynoms set.
-We obtain an equations system where the
unknowns are now the value of u in each nodes
of the mesh,
- this system then is solved.
In this way, the solution u is interpoled in each element of the mesh
and this solution is not a constant in this element.
Why in COMSOL, in the visualization step, we obtain
always a constant solution in each element ?
Does COMSOL do an average of u of the value at the nodes of the element to show
the result ? How can I obtain the interpoled solution in each element ? The previous polynom are used ?
The COMSOL's books do not explain this
procedure...
Thank you for your ideas
D. S
Hello Daniel Smouthie
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.