Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Boundary Number
Posted 2017年5月22日 GMT-4 10:23 1 Reply
Please login with a confirmed email address before reporting spam
Is there any way i can determine the boundary number in comsol model? I am trying to assign Ground to a part, but some portion is not visible due to over lab. Is there any way i can identify that part?
1 Reply Last Post 2017年5月22日 GMT-4 14:07
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Updated:
8 years ago
Hello Prashant,
To select a boundary that is hidden inside a part, turn on transparency or wireframe rendering, and then use your mouse's scroll wheel (See www.comsol.com/support/knowledgebase/1168/).
If you still want the software to display the boundary numbers for some reason, check the Show Geometry Labels checkbox on the View node. Boundary numbers will be displayed when you have a boundary condition node selected in the Model Builder.
Best,
Jeff
PS: This video summarizing several ways of selecting geometric entities may be useful to you as well: www.comsol.com/video/selecting-geometric-entities-comsol-multiphysics
To select a boundary that is hidden inside a part, turn on transparency or wireframe rendering, and then use your mouse's scroll wheel (See www.comsol.com/support/knowledgebase/1168/).
If you still want the software to display the boundary numbers for some reason, check the Show Geometry Labels checkbox on the View node. Boundary numbers will be displayed when you have a boundary condition node selected in the Model Builder.
Best,
Jeff
PS: This video summarizing several ways of selecting geometric entities may be useful to you as well: www.comsol.com/video/selecting-geometric-entities-comsol-multiphysics