Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Coil temperature dropping when should be rising

Posted 2017年5月23日 GMT-4 14:53 Low-Frequency Electromagnetics, Heat Transfer & Phase Change, Studies & Solvers Version 5.2a, Version 5.3 0 Replies

Jeffrey Doody
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am running a 2D axisymmetric model of a layer wound coil (using the coil group feature) to predict the coil's temperature rise. I am getting non-physical results possibly due to the time step size, ie: I need smaller time steps to properly solve the thermal part of the problem. I only need these smaller time steps in a few discrete sections of the solution. The coil runs for a 30s current pulse and I need to have smaller time steps from t=5s-6s and from t=12s-13s. Is there a way to specify specific time steps for specific times in the solver - maybe by using a logical expression when defining the minimum and maximum timpe steps?

Thanks
0 Replies Last Post 2017年5月23日 GMT-4 14:53
COMSOL Moderator

Hello Jeffrey Doody

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content