Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Roughness surface sliding damage

Posted 2017年6月13日 GMT-4 02:48 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Materials, Structural Mechanics Version 4.2 0 Replies

Anderson Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi guys,

I'm new to Comsol. I really need a some help to create the following model: two contact surfaces with random apertures, then apply a normal and shear stress to one surface. I want to simulate the damage induced by this surface sliding and resulted aperture.

Is this model possible to be created in COMSOL?

Thx!
0 Replies Last Post 2017年6月13日 GMT-4 02:48
COMSOL Moderator

Hello Anderson Li

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content