Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulating an Electric field with water and silicon nitride?
Posted 2017年6月13日 GMT-4 10:45 0 Replies
Please login with a confirmed email address before reporting spam
I'm new to comsol so please bear with me!
In my simulation, I'm trying to view electric field as a current
travels from the geometry labeled 'Water Top' through the various cones
into the geometry labeled 'Water Source,' which is grounded. This set-up is
surrounded by the insulator Silicon Nitride as both a block surrounding
'Water Source' and conical micro needles. The water channels exist through
the silicon nitride, as seen in the geometry.
I would expect the results to feature a strong electric field through the
water cylindrical channels, with it rapidly degrading as it expands
radially into the insulator, but I must be making a mistake somewhere.
Any insight as to why this isn't working is much appreciated.
The file can be downloaded here:
drive.google.com/open?id=0B95gJ0PbzIsweXVvYzdPZnh0UGs
Thank you in advance!
Hello Jesse Fine
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.