Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Squeeze film
Posted 2017年6月22日 GMT-4 11:39 MEMS & Nanotechnology, Fluid & Heat, MEMS & Piezoelectric Devices, Microfluidics, Porous Media Flow, Simulation Apps, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics 0 Replies
Please login with a confirmed email address before reporting spam
I'm trying to model a silicon box with an applied pressure on it. Of course, the pressure is supposed to give a deformation of the plate on the top. Till there it was ok!!!!!
The problem is that inside the box there is air. How can i model the squeeze effect of the gas?
I estimate that at over a certain pressure on the top plate the deformation stops because of the opposite pressure of the gas.
Thanks in advice
Hello Aladin Muha
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.