Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Can sequential boundary conditions be applied in COMSOL 3.5?

Please login with a confirmed email address before reporting spam

Hi,

I have a plate that will be under two different loads. The sequence of the loadings is important and makes difference. I was wondering if the sequence of 1-applying the first force, 2- saving the solution, and lastly using the solution for the initial values of the second loading, can be automated.
I was hoping that the Solver Sequences option in the Solver Manager of COMSOL 3.5 could let me do this, but my impression is that this option is not applicable for change in boundary condition, but the solver type.

Any advice on how to do this is appreciated.

Thanks.
Manuel

0 Replies Last Post 2011年3月18日 GMT-4 12:59
COMSOL Moderator

Hello Mazyar Amin

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.