Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

interior boundary conditions in a 1D multi layer model

Posted 2011年3月21日 GMT-4 17:46 Version 3.5a 0 Replies

Lakshmi Pisipati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am modeling a multi-layer nanoscale model using Boltzmann transport equation. I need to input continuous flux and temperature interface conditions in the below form.
k1dT/dx=k2dT/dx and T1=T2 at the interfaces.
The original equation I am trying to solve is dT/dt+Kn*dT/dx=alpha*d2T/dx2.
I am having problem because the coefficients of dT/dx are completely different in the equation (Kn) and interface condition(k). I think COMSOL allows only same coefficients. Can you please let me know if it is possible to solve with different coefficients.

Is there a way to create user defined boundary conditions?

I am using v3.5a

Thanks a lot,
Lak
0 Replies Last Post 2011年3月21日 GMT-4 17:46
COMSOL Moderator

Hello Lakshmi Pisipati

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content