Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Pipe leakage detection
Posted 2017年11月30日 GMT-5 09:20 5 Replies
Please login with a confirmed email address before reporting spam
Hello !
I need related files or tutorials of pipe leakage detection .
thanks
Please login with a confirmed email address before reporting spam
Hello Lin,
There was a keynote presentation at last year's COMSOL Conference in Boston on using COMSOL for the detection of pipe leakage. Here is the video:
https://www.comsol.com/video/keynote-predicting-leak-locations-in-pipes-with-simulation
The slides are here:
http://cdn.comsol.com/resources/2016-keynotes/boston/Perrier-On_the_Accuracy_of_Predicting_Leak_Location_in_Fluid-Filled_Pipes.pdf
Best regards,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
thankyou very much , yes I have these but I need related tutorial using comsol multiphysics
Please login with a confirmed email address before reporting spam
This particular work was authored by one of COMSOL's commercial clients, so there are no tutorials available for it. Their work uses the Pipe Flow Module. For tutorials for the Pipe Flow Module, if you do have that product on your license, go to File > Application Libraries > Pipe Flow Module. If you do not have a license for the Pipe Flow Module, you will find tutorials here instead: https://www.comsol.com/models/pipe-flow-module .
Best regards,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
Can you please guide me with its geometry I want to draw pipe with two sensors inserted on it one act as transmitter other act as receiver .
Please login with a confirmed email address before reporting spam
Hello !
Can I design leakage detection system with acoustic sensors and valves which act as leakage detection points and and want to control manually using comsol ?