Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
64 pipes in comsol
Posted 2011年3月29日 GMT-4 05:41 2 Replies
Please login with a confirmed email address before reporting spam
Hi
I've been trying to mesh 64 little straight pipes with comsol 4.1. The pipes are surrounded by air and they produce 64 different heats. My problem is when I use the comsol default meshing (physics dependent) there is an error, so I changed my way and try to mesh the pipes by using the Free triangular and sweept tools. I've get good results for the pipes however when I try to mesh the surrounding air a new error happens.
Any idea about how to mesh this problem?
Thank you in advance.
I've been trying to mesh 64 little straight pipes with comsol 4.1. The pipes are surrounded by air and they produce 64 different heats. My problem is when I use the comsol default meshing (physics dependent) there is an error, so I changed my way and try to mesh the pipes by using the Free triangular and sweept tools. I've get good results for the pipes however when I try to mesh the surrounding air a new error happens.
Any idea about how to mesh this problem?
Thank you in advance.
2 Replies Last Post 2011年3月31日 GMT-4 04:19
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
is the air a cylinder ? if so, have you tried to mesh the pipes and the air in one go (sweep) ?
Or I can suggest that you divide the tube lengths by an equal number of elements along the cut line, to have/help the mesh sweep along the full geometry in a continuous way
--
Good luck
Ivar
is the air a cylinder ? if so, have you tried to mesh the pipes and the air in one go (sweep) ?
Or I can suggest that you divide the tube lengths by an equal number of elements along the cut line, to have/help the mesh sweep along the full geometry in a continuous way
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi.
Good idea!!
Thank you!
Good idea!!
Thank you!