Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Element order and mesh resolution
Posted 2017年12月19日 GMT-5 06:38 Fluid & Heat, Computational Fluid Dynamics (CFD), Mesh Version 5.3 1 Reply
Please login with a confirmed email address before reporting spam
The default discretization of fluids (incompressible Navier-Stokes laminar flow) is P1+P1. I often read that P2+P1 should better be used instead of P1+P1 in order to get better accuracy. Instead of increasing the mesh element order one could also refine the mesh to get better accuracy of course. My question is: is there a rule of thumb on what is the preferred option; increasing the mesh element order from P1+P1 to P2+P1 or refining the mesh and keeping the mesh elements to P1+P1? Or are there any considerations to keep in mind when making such a choice?
Leon Kamp
Please login with a confirmed email address before reporting spam
Dear leon,
I would like to suggest that you ask your question directly to support@comsol.com for a quicker answer.
Met vriendelijke groet, Best regards,
Yara Soares
COMSOL BV | Röntgenlaan 37 | 2719 DX Zoetermeer Phone: +31 (0)79 363 4230 | Fax: +31 (0)79 361 4212
www.comsol.nl | yara.soares@comsol.com
Stay in touch with COMSOL in Social Media:
Find a listing of COMSOL events for the winter at: www.comsol.nl/events