Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Which material parameters are needed when modelling viscoelasticity?
Posted 2017年12月31日 GMT-5 06:20 Structural & Acoustics, Parameters, Variables, & Functions, Structural Mechanics Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
Dear all,
I am quite a new comsol user and am trying to model rutting in an asphalt solar collector. Due to the viscoelastic nature of asphalt, i am using the viscoelastic interface from the structural mechanics module. Here 3 models are available and I want to use both the kelvin-voigt model and the SLS model (not simultaneous ofcourse). In the SLS model the shear modulus "Gv" is asked, however I wasn't able to find anywhere whether this is the ordinary shear modulus, the complex shear modulus or the loss/storage modulus. I have kind of the same problem with the young's modulus, how do I implement the complex young's modulus rather than the normal one?
With kind regards,
De Keninck Matisse
Please login with a confirmed email address before reporting spam
Dear Matisse,
Can I suggest you send your technical questions to support@comsol.com. My colleagues there will gladly assist you. If you have further general questions, you can contact me.
Met vriendelijke groet, Best regards,
Yara Soares
COMSOL BV | Röntgenlaan 37 | 2719 DX Zoetermeer Phone: +31 (0)79 363 4230 | Fax: +31 (0)79 361 4212
www.comsol.nl | yara.soares@comsol.com
Stay in touch with COMSOL in Social Media:
Find a listing of COMSOL events for the winter at: www.comsol.nl/events