Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Excitation a 2D model use Lumped port
Posted 2018年2月28日 GMT-5 05:39 0 Replies
Please login with a confirmed email address before reporting spam
Hello, I want to use lumped port to excitate a 2D axisymmetric model and I use magnetic and electric fields (mef).
I want know how to choose the boundary so that each condunctor (yellow rectangular in the attached pic) is excitated.
And what is the right value of the height and width in the lumped port setting if I want to use only one lumped port to excitate all the conductors.
Also if the current is flowing within the circular conductor, how could I give the direction in the lumped model setting because for 2D axisymmetric, there are only input field of r and z direction.
Or can someone just give me an example about using of lumped model in a 2D model Thank you very much!
Attachments:
Hello Liu Chang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.