Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
A possible solution to "mass matrix is zero" error
Posted 2018年2月28日 GMT-5 16:13 Piezoelectric Devices, Structural & Acoustics, Structural Mechanics Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
The below post is related to an archived discussion
Hi all,
For those who get this error, one possible cause is that the mesh is only performed at the surface of the structure. A quick way to check is to change the mesh to "Physic-controlled" to see if it runs without error. If so, the problem can be solved with "User-controlled" mesh by "Swept" the region, which can be found by right clicking the mesh tab. Please see "Flow Through a Pipe Elbow" in COMSOL application library for more details about sweeping mesh in 3D. Hope it helps.
Best,
Zhetao
Hello Zhetao Jia
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.